Thickness Planers for Wood

A thickness planer machines boards and beams to a set thickness so the second face comes out parallel to the first. The section holds single-sided FDB Maschinen planers from the compact 220 V MB13 to the MB104, MB104F, MB104AT, MB106B and MB106H with planing widths up to 630 mm, plus the double-sided MB204A and MB206F that plane both faces in one pass.

8 products · from 22 400 ₴

All: Woodworking machines Wood milling machines8 Panel saws and circular saws10 Table saws6 Wood band saws9 Thickness planers8 Jointers4 Edge banding machines4 Combination woodworking machines8 Dust collectors4 Wood lathes6

● In stockFDB Maschinen MB106B thickness planer

~~69 900 ₴~~ 63 000 ₴incl. VAT · 52 500 ₴ excl. VAT

● In stockMB104 thickness planer

~~60 900 ₴~~ 49 000 ₴incl. VAT · 40 833,33 ₴ excl. VAT

● In stockMB104F thickness planer

98 000 ₴incl. VAT · 81 666,67 ₴ excl. VAT

● In stockThickness planer FDB Maschinen MB13

22 400 ₴incl. VAT · 18 666,67 ₴ excl. VAT

○ To orderThickness planer MB104AT

69 000 ₴incl. VAT · 57 500 ₴ excl. VAT

● In stockThickness planer MB106H

~~197 000 ₴~~ 188 000 ₴incl. VAT · 156 666,67 ₴ excl. VAT

○ To orderDouble-sided thickness planer MB204A

234 000 ₴incl. VAT · 195 000 ₴ excl. VAT

○ To orderDouble-sided thickness planer MB206F

431 514 ₴incl. VAT · 359 595 ₴ excl. VAT

Model comparison

Model	Feed speed, m/min	Cutterhead speed, rpm	Max. planing thickness, mm	Number of knives	Price incl. VAT
Thickness planer FDB Maschinen MB13	6	8500	152	2	22 400 ₴
MB104 thickness planer	8/12,5	4000	120	4	49 000 ₴
FDB Maschinen MB106B thickness planer	10,2	4000	150	3	63 000 ₴
Thickness planer MB104AT	12	4600	140	4	69 000 ₴
MB104F thickness planer	5.6; 9.6	5000	200	4	98 000 ₴
Thickness planer MB106H	08 / 10 / 12	4800	200	4	188 000 ₴
Double-sided thickness planer MB204A	10	4800	120	4	234 000 ₴
Double-sided thickness planer MB206F	8; 11	6500	200	4	431 514 ₴

How to choose a thickness planer

Planing width and thickness

The key figures of a thickness planer are the maximum workpiece width and the thickness range. Choose the width by the widest panel or board you actually process, plus a small margin: glued furniture panels are often wider than a plain board. Minimum thickness matters if you plane thin slats, maximum thickness if you plane beams. Also check the depth of cut per pass: on hardwoods it is reduced so the motor is not overloaded.

Single-sided or double-sided

A single-sided planer works only the top face, so the bottom face must already be flat: it is prepared on a jointer, or the stock is bought calibrated. A double-sided planer has two cutter blocks and planes top and bottom in one pass, giving a beam or board of the set thickness. For mouldings, furniture beams and packaging this cuts time considerably, while a joinery shop is usually fine with a single-sided machine.

Cutter block and feed

Surface quality depends on the number of knives, cutter block speed and feed rate: the more cuts per centimetre of length, the smoother the surface. A spiral cutter block with small carbide inserts runs quieter and tears out less grain around knots, and an insert can be rotated without removing the block. Variable feed lets you run soft pine fast and plane oak or beech slowly.

Power supply and chip extraction

Compact planers such as the MB13 run on 220 V, industrial ones on 380 V, so check which supply your workshop has. A planer produces a lot of chips, and without extraction they clog the feed area and leave dents in the workpiece. The machine's dust port diameter must match your extractor. Long workpieces are easier to feed with roller stands at the infeed and outfeed.

FAQ

Do the prices include VAT?

Two amounts are shown next to each price: incl. 20% VAT (large) and excl. VAT. We provide an invoice and a delivery note for legal entities and sole proprietors (FOP).

What is the warranty on the machines?

The machines come with a 12-month warranty. Goods of proper quality can be returned within 14 days in accordance with the law.