Metal-cutting band saw OPTIsaw SD 200G
power0.55 / 0.75 kWvoltage400 Vweight130 kg
86 040 ₴incl. VAT
71 700 ₴ excl. VAT · invoice for companies and sole proprietorsGet an invoice or a quote
Nova Poshta, Meestat the carrier's rate
Freight carrierat the carrier's rate
Pickup, Dniprofree
Warranty12 months
Specifications
| Main attributes | |
|---|---|
| Country of origin | Germany |
| Manufacturer | Optimum |
| Dimensions and weight | |
| Width without fence | 475 mm |
| Width with fence | 535 mm |
| Height with frame lowered | 790 mm |
| Height with frame raised | 1200 mm |
| Work table height | 530 mm |
| Length | 1295 mm |
| Width | 535 mm |
| Height | 1200 mm |
| Weight | 130 kg |
| Electrical | |
| Motor power | 0.55 / 0.75 kW |
| Coolant pump power | 0.1 kW |
| Voltage | 400 V |
| Frequency | 50 Hz |
| Sawing | |
| Band speed | 44 / 88 m/min |
| Saw blade length | 2360 mm |
| Saw band width | 19 mm |
| Saw band thickness | 0.9 mm |
| Cutting angle | 0 - 45° |
| Feed | variable |
| Saw frame lift | manual |
| Cutting | |
| Round 0° | 180 mm |
| Square 0° | 180 mm |
| Rectangle 0° (upright) | 180 x 240 / 50 x 300 mm |
| Round 45° | 110 mm |
| Square 45° | 150 mm |
| Rectangle 45° (upright) | 110 x 170 mm |
| Note | Cutting range measured on aluminium; may be smaller for other materials |
Description
The OPTIsaw SD 200G metal band saw cuts round and profiled stock, pipe and solid workpieces in steel, aluminium and non-ferrous metals. Smooth hydraulic frame feed and blade cooling give a straight cut without overheating, so this band saw machine is well suited to cutting batches of identical blanks to length.
At 0° it cuts 180 mm round or 180 x 240 mm rectangular stock, 110 mm at 45°, and the vise swivels to 45°. The 750 W motor runs on 380 V at 44/88 m/min, the blade is 2360 x 19 x 1 mm and the machine weighs 130 kg. It is built for machine shops, stock-cutting areas and metal depots doing one-off and small-batch cutting.
Technical description:
- The OPTIsaw SD 200G metal band saw is used in metalworking shops and small workshops for cutting profiled and solid metal workpieces.
- This band saw model is mobile thanks to its wheeled stand, which considerably extends the service area in production and also allows use in construction, directly on a building site where there is no auxiliary hoist or overhead crane.
- Thanks to the sturdy design and smooth adjustment of the saw frame descent by a hydraulic cylinder, the cut is of high quality.
- The new-generation hydraulic cylinder is maintenance-free.
- Reliable bearings serve as guides, allowing precise adjustment of the blade geometry against skewing.
- The installed coolant system feeds coolant into the cutting zone, preventing overheating of the saw blade and limiting blade wear.
- The OPTIsaw SD 200G metal band saw is equipped with a special wire brush that cleans chips off the band and makes the cut more efficient. After cutting is finished, the band drive switches off automatically thanks to a limit sensor.
- The metal band saw complies with all current safety standards.
- The OPTIsaw SD 200G metal band saw is equipped with a convenient control panel located directly on the cast-iron frame, as well as a 0 - 45 swivel vise that extends the functionality of the machine.
- The reliable two-speed motor lets you work in the required cutting mode.
- The OPTIsaw SD 200G metal band saw is easy to operate and maintain.
Specifications:
| Metal band saw | OPTIsaw SD 200G |
| Item no. | 3300200 |
| Power supply | |
| Motor | 750 W / 380 V / ~ 50 Hz |
| Coolant system | 100 W |
| Standard data | |
| Max. cutting diameter, round stock, 0°, mm | 180 |
| Max. cutting size, rectangular stock, 0°, mm | 180 x 240 / 50 x 300 |
| Max. cutting diameter, round stock, 45°, mm | 110 |
| Max. cutting size, rectangular stock, 45°, mm | 170 x 110 |
| Saw blade size, mm | 2360 x 19 x 1 |
| Cutting speed, m/min | 44 / 88 |
| Overall dimensions | |
| Length: | 1295 |
| Width | 535 |
| Height | 1200 |
| Machine weight, kg | 130 |
Product reviews
All MELITA reviews →No reviews of this product yet. Bought it from us? Tell others how it works.
Similar items: Metal-cutting band saws
Entire category →
● In stockMetallkraft MBS 155 K metal-cutting band saw
power2 kWvoltage230 Vweight91 kg
91 200 ₴incl. VAT · 76 000 ₴ excl. VAT
● In stockMetal-cutting band saw PPK-200U
voltage400 Vweight150 kg
99 600 ₴incl. VAT · 83 000 ₴ excl. VAT
