Drilling and milling machine FDB Maschinen DM45LW X-power

The FDB Maschinen DM45LW X-power metal milling machine is a professional model for large-scale industry (mechanical engineering, series production). It is designed for general work on large metal or plastic workpieces. The DM45LW X-power features reliable assemblies, a strong structure and high productivity. The model meets EU safety requirements.

The 1.5 kW motor delivers quality work under heavy loads. Despite its compact size, the machine is stable and protected against vibration. It can also be bolted to a level base. For easy operation the DM45LW X-power has a panel with labelled buttons and controls. The machine runs on a 380 V supply. The adjustable worktable is large enough for comfortable machining of large workpieces.

Equipment features:

• Reliable FDB Maschinen DM 45LW X-power bench metal milling machine with a mechanical gearbox and tapping functions.
• Automatic longitudinal table feed
• Massive cast iron body and base designed for heavy loads.
• Massive smooth table with precise geometry.
• Wide spindle speed range of 75-1600 rpm.
• Quality roller bearings ensure spindle radial runout under 0.015 mm.
• Oil bath for the spindle gear drive.
• Ground and scraped dovetail guideways adjustable with gibs.
• Two quill feed modes: coarse and fine micrometric.
• Tapping mode - automatic reverse when the quill feed direction changes.
• Milling head swivels ± 90° and can work in any intermediate position.
• Efficient and economical 2-speed asynchronous motor.
• Forward/reverse spindle rotation.
• Adjustable nuts on all lead screws allow backlash to be eliminated completely.
• Guideways protected against chips.
• Large safety shield with limit switch.
• Adjustable table travel stops.
• Easy-to-read measuring scale on the front of the table.

Specifications:

Model	DM 45 LW X-power
Power supply
Spindle motor voltage, V	380 V ~50 Hz
Spindle motor power, kW	1,5
Spindle motor type	asynchronous
Tool parameters
Maximum drilling diameter (steel), mm	40
Maximum face milling diameter, mm	80
Maximum end milling diameter, mm	32
Spindle
Number of steps	2x3
Speed control	mechanical
Spindle speed, rpm	75-1600
Spindle speed change method	mechanical
Spindle rotation direction	forward \ reverse
Spindle taper	MT 4
Spindle drawbar thread	M 12
Quill travel, mm	120
Maximum distance from spindle centre to column, mm	230
Maximum distance from spindle to table, mm	480
Milling head
Spindle head swivel (tilt) range, deg	± 90°
Spindle head travel (Z), mm	300
Raising/lowering	manual
Cross table
Table size (LxW), mm	1000x240
Longitudinal table travel (X), mm	760
Cross table travel (Y), mm	230
T-slot size, mm	14
Number of slots, pcs	3
Slot spacing, mm	63
Maximum table load, kg	n/a
Drilling depth adjustment	+
Tapping function	+
Fine quill feed	+
Work area lighting	+
Machine stand	-
Coolant system	optional
Coolant pump motor power, W	-
Overall dimensions of assembled machine
Length, mm	1330
Width, mm	780
Height, mm	1430
Machine weight, kg	330