Floor saw Tekhmann construction TCCC-14/420L

A floor saw is a machine for cutting asphalt and concrete. It cuts the surface to the depth required for the job. The machine is cost-effective, well suited to large volumes of work and meets the technical requirements for installation and demolition work.

The floor saw is built around a single-cylinder 4-stroke air-cooled petrol engine. The fuel level is checked through the filler neck. A mesh filter in the filler neck under the fuel cap must be cleaned of dirt before each refuelling.

Cutting depth is adjusted with the handle and auxiliary wheels.

A water tank cools the diamond blade and reduces its wear rate.

A safety bar is provided for loading/unloading the saw during transport.

The floor saw is supplied without a diamond blade (diamond blade not included).

Features:

• Mobility and ease of use come from the single-cylinder 4-stroke air-cooled LONCIN engine with 420 cm³ displacement and 9 hp.
• Stable engine operation thanks to the high-efficiency TORCH spark plug.
• The cutting tool is a diamond blade 350 mm in diameter.
• Maximum cutting depth is 80 mm.
• A simple, reliable water system cools the blade during operation.
• Easy cutting depth control.

Specifications General Parameters: Fuel consumption, kg/h 3.6 Spark plug gap, mm 0.70 - 0.80 Valve clearance (cold), mm intake: 0.15 ± 0.02, exhaust: 0.20 ± 0.02 Max. cutting depth with Ø350 mm diamond blade, mm 80 Max. diamond blade diameter, mm 350 Oil grade SAE-10W-30 Fuel unleaded petrol, octane 86 or higher (A92 recommended) Fuel tank capacity, l 6.5 Crankcase oil capacity, l 1.1 Sound power level, dB 98 Spark plug type F5T or F6TC or FP JC Diamond blade speed, rpm 2500 Engine shaft speed, rpm 3600 Engine power, kW 9.0 Engine type single-cylinder 4-stroke air-cooled petrol Weight (kg) 95