Power trowel Tekhmann construction TCPT-92/200L

A concrete power trowel levels and smooths freshly poured building mixes, performing rough and finish treatment of horizontal surfaces. This construction equipment is used for cement-sand, gypsum and concrete screeds.

The power trowel is built around a single-cylinder 4-stroke air-cooled petrol engine. The fuel level is checked through the filler neck. A mesh filter in the filler neck under the fuel cap must be cleaned of dirt before each refuelling.

Engine speed is controlled with the throttle lever. The design provides remote engine speed (compaction speed) control.

Trowel blades (set of 4) are not included and are supplied separately.

Features:

• Mobility and ease of use come from the single-cylinder 4-stroke air-cooled LONCIN engine with 196 cm³ displacement and 4.1 hp.
• Stable engine operation thanks to the high-efficiency TORCH spark plug.
• The flexible blade speed range of 60-100 rpm lets you set the optimal finishing level.
• A float pan or steel blades can be fitted, giving a troweling area 920 cm in diameter (included).

Specifications General Parameters: Fuel consumption, kg/h 1.2 Blade rotation diameter, mm 920 Blade speed range, rpm 60-100 Spark plug gap, mm 0.70 - 0.80 Valve clearance (cold), mm intake: 0.15 ± 0.02, exhaust: 0.20 ± 0.02 Oil grade SAE-10W-30 Fuel unleaded petrol, octane 86 or higher (A92 recommended) Fuel tank capacity, l 3.6 Crankcase oil capacity, l 0.6 Sound power level, dB 105.20 Spark plug type F5T or F6TC or FP JC Engine shaft speed, rpm 3600 Blade travel speed, rpm 130 Engine power, kW 4.1 Engine type single-cylinder 4-stroke air-cooled petrol Weight (kg) 90