● In stockFDB Maschinen
Abrasive cut-off saw GYQ400B with wheels
12 000 ₴incl. VAT
10 000 ₴ excl. VAT · invoice for companies and sole proprietorsGet an invoice or a quote
Nova Poshta, Meestat the carrier's rate
Freight carrierat the carrier's rate
Pickup, Dniprofree
Specifications
| Specifications | |
|---|---|
| Cutting angle, deg | 45-90 |
| Min. permissible cutting disc diameter, mm | 200 |
| Power, kW | 2.2 |
| Cutting disc size, mm | 400x32x3.2 |
| Drive system | Twin-belt drive |
| Engine type | asynchronous |
| No-load speed, rpm | 3000 |
| Weight (kg) | 56 |
| Voltage (V) | 380 |
| Frequency (Hz) | 50 |
Description
The FDB Maschinen GYQ400B is a pendulum abrasive cut-off saw for rough cutting of pipe, bar, angle and channel. It suits workshops, steel stockyards and construction sites that need many cuts per shift. Mitre cuts are set with the swivel vice and a guard covers the cutting zone.
The 2.2 kW motor runs on 380 V through a twin-belt drive at 3000 rpm no-load. It takes a 400x32x3.2 mm cut-off wheel and cuts at 45-90 degrees. At 90 degrees it cuts 100x6 mm pipe, 25 mm bar, 100x100x8 mm angle and 100 mm channel. Weight 56 kg, with wheels for moving it around.
The FDB Maschinen GYQ 400 B abrasive cut-off saw is a reliable workshop tool when a large number of rough cuts in metal workpieces is needed. The model has a powerful 2200 W motor connected to a three-phase 380 V supply, so the machine can operate throughout a full work shift. The FDB GYQ 400 B can cut any metal workpiece. Maximum workpiece size - 100x48 mm.
Features:
- Safety guard
- Comfortable handle
- Cutting at 90° and 45°
Scope of delivery:
- Saw
- Documentation
- Packaging
Specifications
| Model | GYQ400 |
| Rated current frequency, Hz | 50 |
| Rated voltage, V | 380 |
| Rated power, W | 2200 |
| Motor type | asynchronous |
| Drive system | Twin-belt drive |
| No-load speed, rpm | 3000 |
| Cutting disc size (OD x ID x t), mm | 400x32x3.2 |
| Maximum size of rolled metal cut at 90° (most of the height of the workpiece must be below the upper edge of the vise jaws): | |
| - round tube, mm | 100x6 |
| - bar, mm | 25 |
| - angle, mm | 100x100x8 |
| - channel, mm | 100x48x5.3 |
| Minimum permissible cutting disc diameter, mm | 200 |
| Cutting angle (vise jaw swivel), deg. | 45-90 |
| Net weight, kg | 56 |
Product reviews
All MELITA reviews →No reviews of this product yet. Bought it from us? Tell others how it works.
Similar items: Metal chop saws
Entire category →
○ To orderAbrasive cut-off saw FDB Maschinen GYQ400HP/220 with wheels
13 650 ₴incl. VAT · 11 375 ₴ excl. VAT
● In stockMetal cut-off saw Metallkraft MTS 356-4B
power3.5 kWvoltage230 Vweight25 kg
23 280 ₴incl. VAT · 19 400 ₴ excl. VAT