○ To orderAbrasive cut-off saw FDB Maschinen GYQ400HP/220 with wheels
13 650 ₴incl. VAT · 11 375 ₴ excl. VAT
○ To orderFDB Maschinen
Chop saw FDB Maschinen GYQ400HP with wheels
13 650 ₴incl. VAT
11 375 ₴ excl. VAT · invoice for companies and sole proprietorsGet an invoice or a quote
Nova Poshta, Meestat the carrier's rate
Freight carrierat the carrier's rate
Pickup, Dniprofree
Specifications
| Specifications | |
|---|---|
| Cutting angle, deg | 45-90 |
| Minimum permissible cut-off wheel diameter, mm | 200 |
| Power, kW | 3.0 |
| Cut-off wheel size, mm | 400x32x3.2 |
| Drive system | Twin-belt drive |
| Motor type | induction |
| No-load speed, rpm | 3000 |
| Weight (kg) | 52 |
| Voltage (V) | 380 |
| Frequency (Hz) | 50 |
Description
The FDB Maschinen GYQ400HP is a pendulum abrasive cut-off saw for rough cutting of pipe, bar, angle and channel. It suits workshops, steel stockyards and construction sites that need many cuts per shift. Mitre cuts are set with the swivel vice and a guard covers the cutting zone.
The 3.0 kW motor runs on 380 V through a twin-belt drive at 3000 rpm no-load. It takes a 400x32x3.2 mm cut-off wheel and cuts at 45-90 degrees. At 90 degrees it cuts 100x6 mm pipe, 25 mm bar, 100x100x8 mm angle and 100 mm channel. Weight 52 kg, with wheels for moving it around.
Abrasive cut-off saw FDB Maschinen GYQ 400 HP
Features:
- The FDB Maschinen GYQ 400 HP abrasive cut-off saw is designed for cutting metals.
- Increased motor power 3.0 kW.
- Reliable three-phase motor.
- Rigid design and high productivity.
- Angle cuts are made with the swivel vise.
- The guard increases operating safety.
- Comfortable handle.
- Cuts at 90° and 45°.
Scope of delivery:
- Cut-off saw
- Operating manual
- Packaging
Specifications
| Model | GYQ400HP |
| Rated frequency, Hz | 50 |
| Rated voltage, V | 380 |
| Rated power, W | 3000 |
| Motor type | induction |
| Drive system | Twin-belt drive |
| No-load speed, rpm | 3000 |
| Cut-off wheel size (ODxIDxt), mm | 400x32x3.2 |
| Maximum section size at a 90° cutting angle (most of the height of the section being cut must be below the top edge of the vise jaws): | |
| - round tube, mm | 100x6 |
| - bar, mm | 25 |
| - angle, mm | 100x100x8 |
| - channel, mm | 100x48x5.3 |
| Minimum permissible cut-off wheel diameter, mm | 200 |
| Cutting angle (vise jaw swivel), deg. | 45-90 |
| Net weight, kg | 52 |
Product reviews
All MELITA reviews →No reviews of this product yet. Bought it from us? Tell others how it works.
Similar items: Metal chop saws
Entire category →
● In stockMetal cut-off saw Metallkraft MTS 356-4B
power3.5 kWvoltage230 Vweight25 kg
23 280 ₴incl. VAT · 19 400 ₴ excl. VAT