Rebar cutting machine MAST Bautechnik GQ40

Description

The rebar cutting machine MAST Bautechnik GQ40  is used for cutting rebar 6-32 mm in diameter and round bar 6-40 mm in diameter. It is of high quality, reliable in operation and requires minimal maintenance. Powered by a 3 kW three-phase motor.
The GQ40 machine works as follows: a rebar rod of the appropriate diameter is placed in the cutting zone between the blades and held by a stop. Cutting is controlled by a foot pedal and a shift lever. The motor transmits rotation through a flywheel and gearbox to the crankshaft, which is connected to the moving blades by a connecting rod. As long as the lever is not released or the pedal is pressed, the blades keep moving continuously. 

The sturdy mechanical design made of quality materials ensures reliable, long service life of the machine. All working units are enclosed, which guarantees safe use. A protective cover shields the operator from flying metal chips. A circuit breaker prevents short circuits and current leakage. The wheeled chassis makes it easy to move the machine around the work area. You can order the MAST Bautechnik GQ40 machine on our website.

Features of the MAST Bautechnik GQ40 rebar cutting machine

• For cutting class A1 rebar 6-32 mm in diameter and class A3 rebar 6-40 mm in diameter

• 3 kW three-phase motor

• Cutting rate - 32 cuts/min

• Mechanical design made of strong materials

• Cover for protection against metal chips

• Enclosed working units

• Wheeled chassis for moving.

FAQ

See the answers to questions about rebar cutting machines.

What are the main types of rebar cutting machines?

Rebar cutting machines are divided into manual (mechanical), electric, hydraulic and automatic.

How to choose a rebar cutting machine?

A rebar cutting machine is chosen by the following parameters:

• Rebar diameter: The maximum diameter the machine can handle

• Workload: For small jobs a mechanical or electric machine will do; for large volumes it makes sense to choose automatic or hydraulic models

• Mobility: Whether the machine needs to be moved around the work area

• Budget: The cost of the equipment and its maintenance.

How to maintain a rebar cutting machine?

To keep the machine in proper condition:

1. Lubricate moving parts regularly

2. Check the oil level in the gearbox

3. Clean metal residue off the machine

4. Check the condition of the cutting elements and replace them when worn

5. Monitor the fastening of parts and the condition of the electric motor or hydraulic system.

Can such a machine cut several rebar rods at once?

Many modern machines can cut several rods at once if their total diameter does not exceed the maximum working capacity of the equipment.

What is the service life of a rebar cutting machine?

With correct use and proper care, a quality machine lasts 10 to 15 years.