

Hoisting gearbox shaft for 2 t electric hoist, 12 m
Specifications
| Main | |
|---|---|
| Country of origin | Bulgaria |
| Catalog number | |
| catalog number | 169172 |
Description
This hoist gearbox shaft is a cylindrical shaft with gear teeth at both ends that comes out of the second stage of the planetary lifting gearbox. It transfers rotation from the brake motor to the lifting gearbox. Shaft length and diameter depend on hoist capacity and lifting height.
This shaft is for a 2 t T-series electric hoist with a lifting height of 12 m. Tooth diameter 25 mm, length 531 mm, catalogue number 169172, made in Bulgaria. Above 18 m of lifting height an intermediate shaft and an extra flexible coupling are added. A part for repair services and plants running Bulgarian hoists.
A cylindrical shaft comes out of the second gear stage of the electric hoist planetary hoisting gearbox. It has gearing on both ends and transmits rotation from the brake motor to the hoisting gearbox.
The shaft length and diameter depend on the lifting height of the hoist; the table below gives these dimensions:
|
Load capacity, t |
Lifting height, m |
Length, mm |
d over teeth, mm |
|
0,5 |
6 |
245 |
20 |
|
9 |
335 |
||
|
12 |
415 |
||
|
1 |
6 |
270 |
20 |
|
9 |
375 |
||
|
12 |
475 |
||
|
2 |
6 |
316 |
25 |
|
9 |
431 |
||
|
12 |
531 |
||
|
3,2 |
6 |
316 |
25 |
|
9 |
441 |
||
|
12 |
550 |
||
|
5 |
6 |
355,5 |
30 |
|
9 |
462,5 |
||
|
12 |
566,5 |
When the lifting height exceeds 18 m, an intermediate shaft and one more compensating flexible coupling are additionally used.
Gearbox shafts for all versions of T-series hoists made in Bulgaria are always in stock at our warehouse. You can buy them by calling our office at the numbers listed in the Contacts section.
Product reviews
All MELITA reviews →No reviews of this product yet. Bought it from us? Tell others how it works.


