● In stockHigh-precision toolmaker's vise 200 mm
jaws160 mmopening190 mmweight24 kg
18 000 ₴incl. VAT · 15 000 ₴ excl. VAT
● In stockArt. 15050
Precision toolmaker's vise 150 mm
jaws150 mmopening175 mm
20 340 ₴incl. VAT
16 950 ₴ excl. VAT · invoice for companies and sole proprietorsGet an invoice or a quote
Nova Poshta, Meestat the carrier's rate
Freight carrierat the carrier's rate
Pickup, Dniprofree
Warranty12 months
Specifications
| Main | |
|---|---|
| Country of origin | China |
| Vise type | machine |
| Swivel mechanism | No |
| Jaw width | 150 mm |
| Jaw height | 50 mm |
| Max. vise opening | 175 mm |
Description
The TL-150 precision toolmaker's vise is made of tool steel and is used for milling, grinding, layout and inspection work. The fixed jaw is integral with the body and has a flat ground face, while the movable jaw has V-grooves, so the vise holds both flat and round parts securely.
Jaw width 150 mm, jaw height 50 mm, maximum opening 175 mm. Jaws and guideways are hardened to HRC 58-62, and the side faces are parallel to each other and square to the base, so accuracy is kept in vertical, horizontal and side positions. It mounts on a magnetic chuck or machine bed. Suited to toolrooms, quality control and grinding work.
Toolmaker's machine vise TL150, tool steel.
TL150- high-precision toolmaker's machine vise made of tool steel with a jaw width of 150 mm, used for milling, measuring, marking, grinding and other work.
Structurally, the tool is a pair of parallel jaws, one of which is fixed, while the other is pressed against the workpiece by a trapezoidal screw. The fixed jaw is integral with the vise body, and its surface is flat and ground. The movable jaw has V-grooves on its surface that allow accurate and secure clamping of both flat and cylindrical workpieces.
The hardness of the working surfaces of the guides and jaws reaches HRC 58-62. The side faces of vises in this series are parallel to each other and perpendicular to the base. Parallelism of the guide surface to the base surface is 0.005 mm per 100 mm. Perpendicularity of the jaws to the guide surface is also 0.005 mm per 100 mm.
TL series vises retain their accuracy when used in vertical, horizontal and side positions. The tool is designed to be mounted on a magnetic table or machine bed.
Attention!
In the TL series, at maximum vise opening the screw nut flange fits completely into the movable jaw body without any gaps
To keep the vise operating smoothly and accurately, the moving parts must be lubricated regularly
features:
High product quality
Simple design
High clamping accuracy in any position
High clamping force
Fast clamping
Ground body surface
Hardened working surface
Clamps both flat and cylindrical workpieces
Easy to operate
General specifications:
Vise type: machine
Jaw width: 150 mm
Maximum vise opening: 175 mm
Drive type: manual
Swivel mechanism: no
Clamp for pipes and cylindrical parts: yes
Anvil: no
Material: tool steel
Working surface hardness: HRC 58-62
Parallelism of guide surface to base surface: 0.005 mm / 100 mm
Perpendicularity of jaws to guide surface: 0.005 mm / 100 mm
Condition: new
Product reviews
All MELITA reviews →No reviews of this product yet. Bought it from us? Tell others how it works.
Similar items: Precision and toolmaker's vises
Entire category →
○ To orderToolmaker's vise SVA-160
jaws160 mmopening140 mmweight33 kg
17 340 ₴incl. VAT · 14 450 ₴ excl. VAT
● In stockPrecision toolmaker's vise 125 mm TL-125
jaws125 mmopening160 mm
14 160 ₴incl. VAT · 11 800 ₴ excl. VAT
● In stockHigh-precision machine vise 160 mm
jaws160 mmopening180 mmweight30 kg
12 000 ₴incl. VAT · 10 000 ₴ excl. VAT