# Grinding machine ROXTA RBP-100

- Price: 6 540 ₴ incl. VAT (5 450 ₴ excl. VAT)
- Availability: in stock
- Manufacturer: ROXTA
- Art. 25800100
- Category: Grinding machines and belt grinders
- URL: https://melita.com.ua/en/tovar/shlifuvalnyi-verstat-roxta-rbp-100
- Seller: NTC Melita LLC, Dnipro; +380 50 362-09-72; melita10042015@gmail.com

## Specifications

| | |
|---|---|
| Manufacturer | ROXTA |
| Country of origin | Czechia |
| Power consumption | 350 W |
| Max. speed | 1450 rpm |
| Max. blade diameter | 150 mm |
| Weight | 17 kg |
| Warranty period | 12 months |
| Power supply | Mains 220V |

## Description

The BP-100 combination grinding machine is designed for surface finishing of various soft materials. Work is done with a sanding belt or a sanding disc. Depending on the grit of the belt and disc, you can do both rough stripping of a coarse surface and its final sanding.
This model allows the sanding disc work table to be tilted, so parts can be processed at an angle. The swivel arm can also be raised by 90 degrees.
Thanks to its small size and the option of connecting to a 220 volt household mains supply, the machine can be used in small-batch production, in repair and home workshops, in a garage or at a country house.
Main specifications:
Voltage 230 V
Power consumption 370 W
Rated speed 1450 min-1
Belt speed 275 m/min.
Disc diameter 150 mm
Belt size 100 x 915 mm
Setting angle 0-45°
Eccentric belt motion —
Side table size —
End table size —
Weight 17 kg
order no. 25702100
Main assemblies and parts of the machine
- Machine base.
- Table clamping bolt.
- Miter gauge.
- Tilting table.
- Sanding disc.
- Sanding belt stop.
- Sanding belt.
- Sanding belt tension lever.
- Sanding belt tracking bolt.
- Motor.
The BP-100 machine consists of a base 1 carrying a single-phase electric motor 10, which drives the sanding disc 5 and the sanding belt 7 through a belt drive. The belt drive is enclosed by a guard. Stop 6 is used for work on the sanding belt. A miter gauge 3 is mounted on the tilting table 4. The table can be tilted at an angle of 00-450. Lever 8 is used to tension the belt, and bolt 9 to track it. The machine's electrical control unit is located on the base.
Additional information
 | 
The machine design allows you to change  the tilt of the sanding belt arm from 0 to 90. | 
 | 
The machine design allows you to change  the work table tilt angle from 00 to 45. Wing nut No1. | 
 | 
The work table can be set at an angle to the sanding disc or the sanding belt. |